🔌Current & Circuits

Current, voltage, resistance, Ohm's law, series/parallel and Kirchhoff's rules.

18 minPrerequisites:⚡ Electric Charge & Fields

Current

Current is the rate of charge flow: I=dQ/dtI = dQ/dt (amperes). Conventional current flows + → −; electrons drift the opposite way (slowly — around mm/s!).

Ohm's law

V=IRV = IR Resistance of a wire: R=ρL/AR = \rho L/A.

Power

P=IV=I2R=V2/RP = IV = I^2R = V^2/R.

Series & parallel

  • Series: R=R1+R2+…R = R_1 + R_2 + \dots (same current)
  • Parallel: 1R=1R1+1R2+…\dfrac1R = \dfrac1{R_1}+\dfrac1{R_2}+\dots (same voltage)

Kirchhoff's rules

  1. Junction rule: current in = current out (charge conservation).
  2. Loop rule: sum of voltage changes around any loop = 0 (energy conservation).

RC circuits

Charging a capacitor: VC(t)=V0(1−e−t/RC)V_C(t) = V_0(1-e^{-t/RC}); the time constant is τ=RC\tau = RC.

Build your own circuits in the embedded PhET lab below.

Key formulas

Ohm's law

V=IRV=IR

Power

P=IV=I2RP=IV=I^2R

Parallel

1R=∑1Ri\frac{1}{R}=\sum\frac1{R_i}

RC time constant

τ=RC\tau = RC

Interactive simulation

PhET Interactive Simulations, University of Colorado Boulder (CC-BY 4.0)Open

Videos

Further resources

Check your understanding

1. Two 10 Ω resistors in parallel =

Score: 0 / 1

My notes